NBAR is only supported on SIP-200 (not SIP-400/ES/ES+) and MSFC2 (Sup32). NBAR without a SIP-200 on sup720 will be done entirely in software.
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76cfgsip.html#wp1526795 On Mon, Jan 21, 2013 at 2:16 PM, Alex K. <[email protected]> wrote: > Hi All, > > Can somebody direct me to a document that clearly states whether NBAR on > SVI on 7600 w/ Sup720 is done by hardware or software? > > As I recall, NBAR on 7600 is done by software (except, maybe, for a few > WAN cards, such as FlexWAN & SIP-200) unless Sup32+PISA is envolved (which > is not). But, I can't find a document states this. > > A link wil be appreciated. > > > Best Regards, > Alex. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
