Thank you Pete, Unfortunately, this link is inconclusive either.
Earlier in this document it says that NBAR is indeed supported on SIP-200 (here: http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76ovwsip.html), afterwards it claims it isn’t (here: http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76cfgsip.html#wp1543942 , the same document, simply the next chapter) after these two, comes the chapter you linked to, but unfortunately it claims that no NBAR should be available on MSFC/PFC 3 (by the way of exclusion) but in my case it is supported (i.e. on SVI). It just sends the CPU thru the roof. Thank you for your efforts, but that not seems to be document I'm looking for, either. Will be glad to hear your future thoughts on this one. Best Regards, Alex. On Mon, Jan 21, 2013 at 9:37 PM, Pete Lumbis <[email protected]> wrote: > NBAR is only supported on SIP-200 (not SIP-400/ES/ES+) and MSFC2 (Sup32). > > NBAR without a SIP-200 on sup720 will be done entirely in software. > > > http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76cfgsip.html#wp1526795 > > > On Mon, Jan 21, 2013 at 2:16 PM, Alex K. <[email protected]> wrote: > >> Hi All ... >> >> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
