On Sun, 6 Aug 2000, Tim Ross wrote:
> I am trying to connect two routers via back-to-back Adtran DSU III AR and
> an Adtran 56/64 DSU and am not having any luck. I've set the clock to MASTER
> on the DSU III and set both to 56K, but still get open loop on the DSU III.
> I made (and tested) the cable with 12-45 crossover, but didn't use other
> wires (are they required for anything?). I keep getting Open Loop errors on
> the DSU III, although I've tested the cable. Could it need a different
> crossed pairs? From reading its manual, it appears to need 12-78 crossed.
Yes, for 56K DDS it's 12 - 78 crossed. A Cisco blue "rollover" console
cable will work.
--
Jay Hennigan - Network Administration - [EMAIL PROTECTED]
NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/
WestNet: Connecting you to the planet. 805 884-6323
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
