Are you using
enable password <password>
or
enable secret <password>

??
Keith Woodworth <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
>
> On Fri, 8 Sep 2000, Bryan Osoro wrote:
>
> >>PW Recovery
> >>
> >>Restart the switch while holding the Mode button for 10 seconds, let go,
and
> >>you should be to a switch: prompt.  Type flash_init and then load_helper
> >>after that type rename flash:config.text flash:config.old.   then type
reset
> >>when the switch resets say No to initial config, go to enable mode, type
> >>rename flash:config.old flash:config.text  and then type config t
> >>enable secret <whatever>
> >>ctrl+z
> >>wr me
> >>reload
> >>
>
> Yes thanks, been there a few times. Have followed the directions on
> Cisco's site a few times. Ive done it three times now and all three times
> it does not take the new enable password.
>
> Acutally the Cisco directions are a bit off at the end. They say to wr mem
> while still at the config prompt which doesnt work obviously, have to
> ctrl-z first.
>
> At any rate I do the wr mem then reload, once I'm at the switch prompt
> again I type enable get the password prompt, enter my new enable password
> and it gets rejected the usual three times.
>
> Is there some kind of  bug that is preventing the new enable password from
> being written to the config.text file? I'm using 11.2(8) Enterprise in
> this switch which I will upgrade to 12 something eventually.
>
> Thanks,
> Keith
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>


**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to