hi all,
I got a problem with my 2500 router, anybody pls
xplain what the (boot) means..i can't even
show my routing table...i copied sh ver o/p...
KB(boot)>sh ver
Cisco Internetwork Operating System Software IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1996 by cisco Systems, Inc. Compiled Fri 27-Dec-96 17:33 by loreilly Image text-base: 0x01010000, data-base: 0x00001000 ROM: System Bootstrap, Version
11.0(10c), SOFTWARE
KB uptime is 34 minutes
System restarted by power-on Running default software cisco 2500 (68030) processor
(revision N) with 6144K/2048K bytes of memory.
Processor board ID 09940323, with hardware revision 00000001 X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Basic Rate ISDN software, Version 1.0. 1 Ethernet/IEEE 802.3 interface. 2 Serial network interfaces. 1 ISDN Basic Rate interface. 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write) Configuration register is
0x2102
KB(boot)> KB(boot)#sh ip
rou
^ % Invalid input detected at '^' marker. KB(boot)#
tq
rgds
nazri
|
- RE: Router(boot)# md. nazri
- RE: Router(boot)# Aaron K. Dixon
- Re: Router(boot)# Sam LI
- Re: Router(boot)# Fernando Lima
- Re: Router(boot)# Henrique Issamu Terada
- Re: Router(boot)# Atef Rostom
- Re: Router(boot)# Lowell Sharrah
- Re: Router(boot)# Larry Ogun-Banjo
- RE: Router(boot)# Quadri, Habeeb
- RE: Router(boot)# Lowell Sharrah
- RE: Router(boot)# Kane, Christopher A.