Re: Router(boot)#

[Henrique Issamu Terada]

If your tftp server is not at same network of your router , you can use ip default-gateway, in order to reach the TFTP server. So, you'll be able to do the download.   HTH   Henrique Issamu Terada CPM Comunicações - Brazil CCNP Certified ----- Original Message ----- From: Fernando Lima To: md. nazri ; [EMAIL PROTECTED] Sent: Tuesday, October 24, 2000 12:32 PM Subject: Re: Router(boot)# hi Narri,                  your router missing the IOS in flash memory, for you solve this problem, do you load a new IOS in flash memory and reload the router   Sorry my english is bad regards, Fernando Lima ----- Original Message ----- From: md. nazri To: [EMAIL PROTECTED] Sent: Monday, October 23, 2000 2:44 AM Subject: Router(boot)# hi all, I got a problem with my 2500 router, anybody pls xplain what the (boot) means..i can't even show my routing table...i copied sh ver o/p...     KB(boot)>sh ver Cisco Internetwork Operating System Software IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1996 by cisco Systems, Inc. Compiled Fri 27-Dec-96 17:33 by loreilly Image text-base: 0x01010000, data-base: 0x00001000   ROM: System Bootstrap, Version 11.0(10c), SOFTWARE   KB uptime is 34 minutes System restarted by power-on Running default software   cisco 2500 (68030) processor (revision N) with 6144K/2048K bytes of memory. Processor board ID 09940323, with hardware revision 00000001 X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Basic Rate ISDN software, Version 1.0. 1 Ethernet/IEEE 802.3 interface. 2 Serial network interfaces. 1 ISDN Basic Rate interface. 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write)   Configuration register is 0x2102           KB(boot)>     KB(boot)#sh ip rou                              ^ % Invalid input detected at '^' marker.   KB(boot)#     tq   rgds nazri