Re: Router(boot)#

[Sam LI]

Well, it seems that you boot the system from the Rom, and once you have boot the system from the rom, the system will not run any routhing.   try this on you router show flash and see wether you have the flash or not, if not download an ios to your router Sam LI Wafer Systems ----- Original Message ----- From: md. nazri To: [EMAIL PROTECTED] Sent: Monday, October 23, 2000 12:44 PM Subject: Router(boot)# hi all, I got a problem with my 2500 router, anybody pls xplain what the (boot) means..i can't even show my routing table...i copied sh ver o/p...     KB(boot)>sh ver Cisco Internetwork Operating System Software IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1996 by cisco Systems, Inc. Compiled Fri 27-Dec-96 17:33 by loreilly Image text-base: 0x01010000, data-base: 0x00001000   ROM: System Bootstrap, Version 11.0(10c), SOFTWARE   KB uptime is 34 minutes System restarted by power-on Running default software   cisco 2500 (68030) processor (revision N) with 6144K/2048K bytes of memory. Processor board ID 09940323, with hardware revision 00000001 X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Basic Rate ISDN software, Version 1.0. 1 Ethernet/IEEE 802.3 interface. 2 Serial network interfaces. 1 ISDN Basic Rate interface. 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write)   Configuration register is 0x2102           KB(boot)>     KB(boot)#sh ip rou                              ^ % Invalid input detected at '^' marker.   KB(boot)#     tq   rgds nazri