You need to apply dialer profiles.
Dialer profiles allow you to configure B channels of an ISDN interface with
different IP subnets or Internetwork Packet exchange networks.
ME
On Wed, 25 Oct 2000 09:22:14 -0400, FRS wrote:
> Hi,
>
> I have 4 sites reporting back to Corp over FR ....
> I need to implement ISDN backup to all sites ....
> How do I get the single Corp BRI interface to accept the different remote
> BRI ip addresses and route accordingly ... I am running RIP ....
>
> righ now, only one remote sites is configured as:
>
> int bri0/0
> ip x.x.3.2 255.255.255.0
> no ip directed broadcast
> encap ppp
> dialer string 123456789
> dialer string 987654321
> dialer-group 1
> isdn switch-type basic-5ess
> isdn spid1 12345678901
> isdn spid2 98765432101
> ppp auth chap
> ppp multilink
>
> corp config:
>
> int bri5/0
> ip x.x.3.1 255.255.255.0
> no logging event-subif-link-status
> isdn spid1 998887776554
> isdn spid2 887766554321
> dialer-group 1
> no fair-queue
> ppp auth chap
> ppp multilink
>
> the ip addresses of the other remote site's bri are x.x.4.2/24 ,
> x.x.6.2/24, etc.
>
> my question is :
>
> how do i get the configure the corp bri interface to recognise x.x.4.2,
> x.x.5.2, x.x.6.2 etc ... as it is now only configured for x.x.3.2 ....
>
> or does this not matter ....
>
> please help!
>
> thanks
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_______________________________________________________
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
