PAT can be used when there is a limited number of IP addresses available for a NAT pool or when the NAT pool becomes exhausted and an over flow method is needed. Keep in mind that when using PAT, some applications do not operate well or some fail to operate. Austin wrote: > When does one need to configure PAT on the PIX? > > _________________________________ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- Willie Bell CCIE# 6075, CCDP email [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]