I have a frame relay circuit connected to a 1750 router with an = ip-unnumbered assign to the serial int to point to the Ethernet = interface. I shut down the Ethernet interface and configured a second = serial interface on the router with the ip add. that is attached to a = Cisco 2600 router. I also changed the ip unnumbered to point to that = serial interface. I configured the 2600 to overload Nat and configured = some static interfaces. My problem is: this 1750 is connected to the = internet via frame relay and I'm unable to get any internet traffic to = go pass the 1750. I create a static mapping for the DNS server we are = using and I'm still no able to get no traffic. Need some advice from.... _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
