I need the keepalives from the Ethernet interface for LMI --- martijn michiel <[EMAIL PROTECTED]> wrote: > First thing that jumps into mind is why don't you > define a loopback > interface with an ip address? > > Martijn > > -----Oorspronkelijk bericht----- > Van: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]Namens Ruddy > Cordero > Verzonden: vrijdag 30 maart 2001 16:52 > Aan: [EMAIL PROTECTED] > Onderwerp: PAT > > > I have a frame relay circuit connected to a 1750 > router with an = > ip-unnumbered assign to the serial int to point to > the Ethernet = > interface. I shut down the Ethernet interface and > configured a second = > serial interface on the router with the ip add. that > is attached to a = > Cisco 2600 router. I also changed the ip unnumbered > to point to that = > serial interface. I configured the 2600 to overload > Nat and configured = > some static interfaces. My problem is: this 1750 is > connected to the = > internet via frame relay and I'm unable to get any > internet traffic to = > go pass the 1750. I create a static mapping for the > DNS server we are = > using and I'm still no able to get no traffic. Need > some advice from.... > [EMAIL PROTECTED] > > _________________________________________________________________________ > Get Your Private, Free E-mail from MSN Hotmail at > http://www.hotmail.com. [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/?.refer=text _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
