If you point a static route toward an ethernet interface, what is the
next-hop MAC address? Does it broadcast those packets in hopes that there
is actually a router on that network that might be able to forward them?
And what would happen if there were two routers on a hub hanging off of that
interface? Would they both attempt to route the packet, resulting in a
duplication of the packet? If so, that could allow some pretty interesting
scenarios.
John
> Nope. In the Cisco world, anyway, you can point a static route out a
> physical interface, out a logical interface, out a null interface, or to
any
> network that appears in your routing table. Neat, isn't it!
>
> Chuck
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
> Stull, Cory
> Sent: Friday, December 29, 2000 9:31 AM
> To: '[EMAIL PROTECTED]'
> Subject: ip route question
>
>
> I know I'm showing my ignorance here but I'm tired of trying to find the
> answer on CCO. Must be looking in the wrong places.
>
>
> I just saw a Boson question asking about ip route 0.0.0.0 0.0.0.0
int
> ethernet0
>
>
> I thought you could only point static routes like that out of point to
point
> interfaces? For example: ip route 0.0.0.0 0.0.0.0 int ser0
>
>
>
>
>
>
>
> Cory
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]