Admittedly it is not good practice, particularly in the case of the original
question of this thread. On the other hand, in prepping for the CCIE lab, I
find myself looking at a LOT of scenarios that are filled with instances of
things that are definitely NOT good practice.
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
suaveguru
Sent: Friday, December 29, 2000 10:52 PM
To: Chuck Larrieu; [EMAIL PROTECTED]
Subject: RE: ip route question
You are right, but forwarding packets to a network
seems less seldom use right?
thanks
suaveguru
--- Chuck Larrieu <[EMAIL PROTECTED]> wrote:
> Sure. If the route is in your routing table.
>
> Works for me here in the lab. IOS accepts the
> command. The destination
> router sees the ping requests coming in.
>
> Why not? The router forwards packets based on
> entries in the routing table.
> What, fundamentally, is the difference between ip
> route 0.0.0.0 0.0.0.0
> 172.16.75.45 and ip route 0.0.0.0 0.0.0.0
> 172.16.0.0?
>
> As long as there is an entry in the routing table
> for either, the router
> will forward the packet out the appropriate
> interface.
>
> Chuck
>
>
> -----Original Message-----
> From: suaveguru [mailto:[EMAIL PROTECTED]]
> Sent: Friday, December 29, 2000 6:39 PM
> To: Chuck Larrieu; Stull, Cory; [EMAIL PROTECTED]
> Subject: RE: ip route question
>
> you can point static route out to any network , I
> have
> not done that b4 can you please enlighten me?
>
> I always thought that you can only point static
> routes
> to physical interfaces, logical interfaces and a
> specific host's ip address but not a network
>
>
> suaveguru
> --- Chuck Larrieu <[EMAIL PROTECTED]> wrote:
> > Nope. In the Cisco world, anyway, you can point a
> > static route out a
> > physical interface, out a logical interface, out a
> > null interface, or to any
> > network that appears in your routing table. Neat,
> > isn't it!
> >
> > Chuck
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]] On Behalf Of
> > Stull, Cory
> > Sent: Friday, December 29, 2000 9:31 AM
> > To: '[EMAIL PROTECTED]'
> > Subject: ip route question
> >
> >
> > I know I'm showing my ignorance here but I'm tired
> > of trying to find the
> > answer on CCO. Must be looking in the wrong
> places.
> >
> >
> > I just saw a Boson question asking about ip
> > route 0.0.0.0 0.0.0.0 int
> > ethernet0
> >
> >
> > I thought you could only point static routes like
> > that out of point to point
> > interfaces? For example: ip route 0.0.0.0
> > 0.0.0.0 int ser0
> >
> >
> >
> >
> >
> >
> >
> > Cory
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> > [EMAIL PROTECTED]
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Photos - Share your holiday photos online!
> http://photos.yahoo.com/
>
__________________________________________________
Do You Yahoo!?
Yahoo! Photos - Share your holiday photos online!
http://photos.yahoo.com/
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
