Cisco has been telling me it's not IOS but
I am gonna try putting new IOS and see it fixes
the problem.
Thans everyone valuable input.
Inamu
"Paul Werner" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Follow up on this topic.
>
> A couple of things I did not glean from your post was whether
> this router was a new (to you) install, or whether it was
> previously working and you recently upgraded the code. If the
> case is the latter, I am in strong agreement with Jim Dixon
> that the likely culprit in the process is probably the version
> of code you are running. Specifically, did you have stable
> code on this router and upgrade to a newer 12.x image whereby
> the problems resulted? If so, it is a very strong indicator
> that the problem is with your software, not the hardware. If
> you do have CCO access, you may want to consider putting some
> very stable GD type code, such as 11.2(17) and see if that
> works. If so, and the 12.x code you have does not work, then
> you will need to do some experimentation to see what code is
> stable for the hardware you have and the features you *need*.
> That can only come about through testing. You may also find
> that 12.1x code may have fixed any potential anomalies that
> 12.0x code may have presented.
>
> HTH,
>
> Paul Werner
>
>
> ________________________________________________
> Get your own "800" number
> Voicemail, fax, email, and a lot more
> http://www.ureach.com/reg/tag
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
