I booted 7505 router with newer IOS (12.1-4E) but same result. Now only
thing left is
bootstrap software goes with newer IOS or 12.07T as we upgraded IOS 6 months
ago but did not upgrade bootstrap software.
I kept getting following error message:
%CBUS-3-MIPSTAT: Out of buffers--losing status information for the MIP card
This is what I found on Cisco site.
Error Message %CBUS-3-MIPSTAT: Out of buffers--losing status information for
the MIP card
Explanation This ERROR results from CPU starvation, typically caused by
heavy fast switching activity. The counts displayed for the MultiChannel
Interface Processor (MIP) card are incorrect.
Recommended Action Call your technical support representative for
assistance.
It has been more than month we have been talking to Cisco about this
call and we talked to almost dozen Cisco reps about this problem but
every time they send you new card.
Thanks everyone,
Inamul
-----Original Message-----
From: tv [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 21, 2000 1:09 PM
To: Desai, Inamul
Cc: [EMAIL PROTECTED]
Subject: Re: 7505 Reboots randomly Please HELP
I would try writing the config file to a tftp server instead of the flash.
Also, I hope you have maintainence on this. Call TAC and troubleshoot with
them. If they are unable to find the issue, have them get you new equipment
(assuming you have smartnet).
----- Original Message -----
From: "Desai, Inamul" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, December 21, 2000 2:03 PM
Subject: 7505 Reboots randomly Please HELP
>
> We got 7505 router reboots randomly twice a week or
> when you write to config file. We gone thru changing
> VIP card, resetting all cards, resetting mem modules, swapping
> mem modules on VIP card, powering up and down and talked to Cisco.
> It's running IOS 12.0(7)T with RSM, VIP2 and one PRI module.
> No matter how many times you cold boot it, it brings all
> enable LEDs except one on fastEthenet card. It does help
> some time when I reset FLASH cards.
> D u think it's flash cards ?
>
> here is startup info:
> System Bootstrap, Version 5.3.2(3.2) [kmac 3.2], MAINTENANCE INTERIM
> SOFTWARE
> Copyright (c) 1994 by cisco Systems, Inc.
> RSP processor with 131072 Kbytes of main memory
>
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> CCCC
> CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCreading the file into memory...
> Self decompressing the image :
> #################################################
>
############################################################################
> ####
> ################################################################### [OK]
> %DBUS-3-SW_NOTRDY: DBUS software not ready after HARD RESET, elapsed
12032,
> stat
> us 0x0
> -Traceback= 60192B5C 60195A84 60195B3C 6015444C 601546C8 60128990 600109B0
> %DBUS-3-SW_NOTRDY: DBUS software not ready after HARD_RESET, elapsed
12032,
> stat
> us 0x0
> -Traceback= 60192B5C 60194BA0 60195008 6019845C 600F4E64 600F4ECC 600E9090
> 600E9
> 298 600EA3B0 600EA39C
> %DBUS-3-SW_NOTRDY: DBUS software not ready after RESET, elapsed 12032,
> status 0x
> 40
> -Traceback= 60192B5C 60194EC0 60191AF4 60195054 6019845C 600F4E64 600F4ECC
> 600E9
> 090 600E9298 600EA3B0 600EA39C
> System Bootstrap, Version 5.3.2(3.2) [kmac 3.2], MAINTENANCE INTERIM
> SOFTWARE
> Copyright (c) 1994 by cisco Systems, Inc.
> RSP processor with 131072 Kbytes of main memory
>
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> CCCC
> CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCreading the file into memory...
> Self decompressing the image :
> #################################################
>
############################################################################
> ####
> ################################################################### [OK]
> %CBUS-3-CCBPTIMEOUT: CCB handover timed out, CCB 0x5800FF50, slot 3
> -Traceback= 601A5348 601A398C 601A3E3C 6019D4F0 600EE70C 600F4EFC 600E9090
> 600E9
> 298 600EA3B0 600EA39C
> %LINK-4-NOMAC: A random default MAC address of 0000.0c9a.31e7 has
> been chosen. Ensure that this address is unique, or specify MAC
> addresses for commands (such as 'novell routing') that allow the
> use of this address as a default.
> %SYS-4-CONFIG_NEWER: Configurations from version 12.0 may not be correctly
> under
>
stood.CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> CCCC
> CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> %CBUS-3-MIPSTAT: Out of buffers--losing status information for the MIP
> cardCCCCC
>
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> CCCC
> CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
