I Should have included in my last email that I already performed the cdp
enable command.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 11, 2001 4:05 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: Cant see CDP neighbor
Robert make sure that you enable cdp on the interface. The command is "CDP
enable". You have to be in config-interface mode. Let me know if this
works??
Eric Washington
Banc Of America Securities - Japan
Information Technology / IS
[EMAIL PROTECTED]
-----Original Message-----
From: Roberts, Timothy [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 12, 2001 8:48 AM
To: '[EMAIL PROTECTED]'
Subject: Cant see CDP neighbor
I have two routers connected back to back via two serial cables. I can ping
each one from the other one. The problem is that they do not show up when I
do a show cdp neighbor. I am sure that I am just overlooking something
small.
Thanks
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]