The 2Mbps link i had mentioned is a serial link (E1) & not an ethernet link.
regards
akshay
--
Network Operations (Mumbai)
Bharti BT Internet Ltd.
Tel:- 91-22-6127242
91-22-6127179
Email :- [EMAIL PROTECTED]
"dark_baby" <[EMAIL PROTECTED]> wrote in message
96vudv$dqr$[EMAIL PROTECTED]">news:96vudv$dqr$[EMAIL PROTECTED]...
> Yes. You'll get 2M Transmit & 2M REceive(4M) between A&B with full duplex.
> With half duplex transfer rate is poor, it is about 1M or less.
> You can imply full duplex only with switch, or just host to host link.
With
> hub, you can only use half duplex , because each station must detect
> collision before transfer, full duplex doesn't detect collision(There is
no
> collision with full duplex).
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
