Hi akshay,
If its full duplex you will get 2Mbs of transmit bandwith & 2Mbs of
receive traffic... In a half duplex link you will get a total of 2mbs for
transmit and receive.
hope the above helps,
Santosh Koshy
""Network Operations"" <[EMAIL PROTECTED]> wrote in message
9706m3$ouv$[EMAIL PROTECTED]">news:9706m3$ouv$[EMAIL PROTECTED]...
> The 2Mbps link i had mentioned is a serial link (E1) & not an ethernet
link.
>
> regards
> akshay
>
> --
> Network Operations (Mumbai)
> Bharti BT Internet Ltd.
> Tel:- 91-22-6127242
> 91-22-6127179
> Email :- [EMAIL PROTECTED]
> "dark_baby" <[EMAIL PROTECTED]> wrote in message
> 96vudv$dqr$[EMAIL PROTECTED]">news:96vudv$dqr$[EMAIL PROTECTED]...
> > Yes. You'll get 2M Transmit & 2M REceive(4M) between A&B with full
duplex.
> > With half duplex transfer rate is poor, it is about 1M or less.
> > You can imply full duplex only with switch, or just host to host link.
> With
> > hub, you can only use half duplex , because each station must detect
> > collision before transfer, full duplex doesn't detect collision(There is
> no
> > collision with full duplex).
> >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
