The traffic is going to return through the ISP who owns the netblock you're
using. If ISP owns the IP, the traffic will return via that ISP no matter
which way you send it, as that ISP is announcing it (most likely in a larger
netblock).
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Cisco resources: http://r2cisco.artoo.net/
""Jacek Malinowski"" <[EMAIL PROTECTED]> wrote in message
97r9gs$u7h$[EMAIL PROTECTED]">news:97r9gs$u7h$[EMAIL PROTECTED]...
> Sorry, there is a bug in my hypothetical configuration.
> in set ip next-hope
> should be ISP A (1.1.1.2)
>
>
> ""Bradley J. Wilson"" <[EMAIL PROTECTED]> wrote in message
> 014301c0a3fa$e349f400$f402f7a5@bwilson">news:014301c0a3fa$e349f400$f402f7a5@bwilson...
> > This is just a guess, but how about setting the next hop in the
route-map
> to
> > the IP address of ISP A?
> >
> >
> > ----- Original Message -----
> > From: Jacek Malinowski
> > Newsgroups: groupstudy.cisco
> > To: [EMAIL PROTECTED]
> > Sent: Saturday, March 03, 2001 9:27 AM
> > Subject: Route-map
> >
> >
> > I have a big problem with the route-map command.
> > My network looks like :
> >
> > ISP A ISP B
> > | |
> > | |
> > | |
> > --s0--(router 2611)--- s1--
> >
> > configuration (hypothetical):
> >
> > interface Serial0
> > ip address 1.1.1.1 255.255.255.0
> > !
> > interface Serial1
> > ip address 100.100.100.100 255.255.255.0
> > !
> > interface FastEthernet0
> > ip address 10.0.0.222 255.255.255.0 secondary
> > ip address 192.168.1.1 255.255.255.0
> > ip policy route-map POLICY
> > no ip directed-broadcast
> > !
> > ip classless
> > ip route 0.0.0.0 0.0.0.0 Serial1
> > no ip http server
> > !
> > access-list 2 permit 10.0.0.0 0.0.0.255
> > route-map POLICY permit 10
> > match ip address 2
> > set ip next-hop 1.1.1.1
> >
> > traffic from the network 10.0.0.0 should go through serial 0 and ISP A
> > traffic from the network 192.168.1.0 should go through serial 1 and ISP
B.
> >
> > I don't understand how is it possible, that ping from 10.0.0.0 goes
> through
> > serial 1 and return through serial 0.
> > there is the policy on the ethernet interface.
> >
> > I can't run BGP :( because my router is only 2611
> >
> >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]