1) Check the traceroute result.
2) From your configuration, after you correct it, you may find out that you
can control outgoing traffic.
You probably can not control incoming traffic. Generally, it is very
difficult for you to control incoming
traffic.
""Jacek Malinowski"" <[EMAIL PROTECTED]> ���g��l��
97r9gs$u7h$[EMAIL PROTECTED]">news:97r9gs$u7h$[EMAIL PROTECTED]...
> Sorry, there is a bug in my hypothetical configuration.
> in set ip next-hope
> should be ISP A (1.1.1.2)
>
>
> ""Bradley J. Wilson"" <[EMAIL PROTECTED]> wrote in message
> 014301c0a3fa$e349f400$f402f7a5@bwilson">news:014301c0a3fa$e349f400$f402f7a5@bwilson...
> > This is just a guess, but how about setting the next hop in the
route-map
> to
> > the IP address of ISP A?
> >
> >
> > ----- Original Message -----
> > From: Jacek Malinowski
> > Newsgroups: groupstudy.cisco
> > To: [EMAIL PROTECTED]
> > Sent: Saturday, March 03, 2001 9:27 AM
> > Subject: Route-map
> >
> >
> > I have a big problem with the route-map command.
> > My network looks like :
> >
> > ISP A ISP B
> > | |
> > | |
> > | |
> > --s0--(router 2611)--- s1--
> >
> > configuration (hypothetical):
> >
> > interface Serial0
> > ip address 1.1.1.1 255.255.255.0
> > !
> > interface Serial1
> > ip address 100.100.100.100 255.255.255.0
> > !
> > interface FastEthernet0
> > ip address 10.0.0.222 255.255.255.0 secondary
> > ip address 192.168.1.1 255.255.255.0
> > ip policy route-map POLICY
> > no ip directed-broadcast
> > !
> > ip classless
> > ip route 0.0.0.0 0.0.0.0 Serial1
> > no ip http server
> > !
> > access-list 2 permit 10.0.0.0 0.0.0.255
> > route-map POLICY permit 10
> > match ip address 2
> > set ip next-hop 1.1.1.1
> >
> > traffic from the network 10.0.0.0 should go through serial 0 and ISP A
> > traffic from the network 192.168.1.0 should go through serial 1 and ISP
B.
> >
> > I don't understand how is it possible, that ping from 10.0.0.0 goes
> through
> > serial 1 and return through serial 0.
> > there is the policy on the ethernet interface.
> >
> > I can't run BGP :( because my router is only 2611
> >
> >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
