>From what I've seen of this command, it seems to allow a DCE interface to
receive timing from a DTE.
Would like to see a decent explanation of its function.
Never seen it before. I'm not sure whether you're using it in error when you
should be using a DCE cable and setting clockrate, or whether you're ahead
of me and you know a neat trick.
Cheers,
Gareth
""Nigel Taylor"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Robert,
> Where have you been..? Haven't seen you in the group for
> sometime. I was also wondering about Bob Envry of VA/DC/MD CPAW fame
> haven't heard from him in a while as well.
>
> Anyway, good to see that you're still around..(our famous cable
guy)....:-)
>
> Nigel..
>
> ----- Original Message -----
> From: robert lowery <[EMAIL PROTECTED]>
> Newsgroups: groupstudy.cisco
> To: <[EMAIL PROTECTED]>; Eric ding <[EMAIL PROTECTED]>
> Sent: Wednesday, March 07, 2001 8:58 AM
> Subject: Re: strange question about dce setting?
>
>
> > Have you tried to use a special crossover cable... that is db60 both
ends
> but wired with
> > one end dce and the other dte. To make it work you add the command
> clockrate 64000 (for
> > example) on the interface that has the dce end. If you try to add
> clockrate on the dte
> > end ..it will not allow you to do so. If you do a show controler serial
> (port no) it
> > will tell you what type of end is attached.
> >
> > ps I sell these specials cables on ebay and direct.
> >
> > bob...aka barronvonpuppy
> >
> >
> > Eric ding wrote:
> >
> > > two 2500 routers,routerA and routerB, back-to-back connection .both
of
> > > them use serial 0,when i set routerA's serial for dce,i got the
output
> > > below:
> > > routerA(config-if)#dce-terminal-timing-enable
> > > %not allowed on dte interface
> > > but if i use the command below:
> > > routerA(config-if)#no dce-terminal-timing-enable
> > > routerA(config-if)#dce-terminal-timing-enable
> > > it does work.
> > > i was confused about it!
> > > any suggestion will be appreciated!
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
