Do you need to have the 'login' command under the 'line aux 0' heading?
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
John Neiberger
Sent: Monday, March 12, 2001 2:50 PM
To: [EMAIL PROTECTED]
Subject: Reverse Telnet on 2600 routers not working
I posted this problem about a year or so ago and we never did find a
resolution to it and I still can't find anything on CCO about it. The
problem is that I can't reverse telnet out of the AUX port on a 2600
router. I have a dial modem attached to it that does function, yet when
I try to RT to it the connection is refused.
Here is the config:
line aux 0
modem InOut
transport input all
stopbits 1
speed 38400
flowcontrol hardware
Someone suggested adding "no exec", but that had no effect. This exact
config works just fine on any 2500 in our network, but I have yet to get
RT working with a 2600 series router running 12.0 or 12.1.
Any other ideas?
Thanks,
John
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
