Whoops, I forgot to include that. Yes, that is the port I am using.
>>> "Kelly D Griffin" <[EMAIL PROTECTED]> 3/12/01 1:27:28 PM >>>
What port are you trying to telnet to on the 2600? Port 2065?
Kelly D Griffin, CCNA, CCDA
Network Engineer
Kg2 Network Design
http://www.kg2.com
----- Original Message -----
From: "John Neiberger" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, March 12, 2001 1:50 PM
Subject: Reverse Telnet on 2600 routers not working
> I posted this problem about a year or so ago and we never did find a
> resolution to it and I still can't find anything on CCO about it.
The
> problem is that I can't reverse telnet out of the AUX port on a 2600
> router. I have a dial modem attached to it that does function, yet
when
> I try to RT to it the connection is refused.
>
> Here is the config:
>
> line aux 0
> modem InOut
> transport input all
> stopbits 1
> speed 38400
> flowcontrol hardware
>
> Someone suggested adding "no exec", but that had no effect. This
exact
> config works just fine on any 2500 in our network, but I have yet to
get
> RT working with a 2600 series router running 12.0 or 12.1.
>
> Any other ideas?
>
> Thanks,
> John
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> ____________________________________________
> http://1cis.com
> Free E-mail Servers with unlimited mailboxes
> 1st Class Internet Solutions
____________________________________________
http://1cis.com
Free E-mail Servers with unlimited mailboxes
1st Class Internet Solutions
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
