exactly what is accomplished by this configuration and command?
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday, March 13, 2001 6:34 AM
To: [EMAIL PROTECTED]
Subject: RE: Reverse Telnet on 2600 routers not working
reverse telnet to next device. Aux port is line 65 on 3620/2600
series. 129 on 3640.
1. Configure ip address on box.
ie.
config t
int loopback 0
ip address 10.10.10.1 255.255.255.255
2. configure line aux port.
line aux 0
transport input all
exec
3. Test
telnet 10.10.10.1 2065
------------------------------------
This message was sent by Cosmiverse.
http://www.cosmiverse.com
Get Your Free Email Account Today!
Join us Today as a Digital Passenger aboard
Cosmic Voyage 2000 ( http://www.cosmicvoyage2000.com )!
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
