Nope, I posted the entire AUX port config. This exact configs works
perfectly on all 2500 series routers, but reverse telnet does not work
with this config on a 2600. The dial backup modem functions on both
routers, though. If the main circuit goes down, the backup modem will
dial out and proceeds to function normally, only reverse telnet is
broken.
>>> "Stanfield Hilman B (Brad) CONT NSSG" <[EMAIL PROTECTED]>
3/12/01 1:13:33 PM >>>
John,
Silly question, but, do you have a login and password statement in the
config for the port?
************************************************************************
Brad Stanfield CCNA/CCDA
Network/Integration Engineer
[EMAIL PROTECTED]
Government Micro Resources
Network Operations Control Center
Norfolk Naval Shipyard
Bldg 33 NAVSEA NCOE
757-393-9526
1-800-626-6622
-----Original Message-----
From: John Neiberger [mailto:[EMAIL PROTECTED]]
Sent: Monday, March 12, 2001 2:50 PM
To: [EMAIL PROTECTED]
Subject: Reverse Telnet on 2600 routers not working
I posted this problem about a year or so ago and we never did find a
resolution to it and I still can't find anything on CCO about it. The
problem is that I can't reverse telnet out of the AUX port on a 2600
router. I have a dial modem attached to it that does function, yet
when
I try to RT to it the connection is refused.
Here is the config:
line aux 0
modem InOut
transport input all
stopbits 1
speed 38400
flowcontrol hardware
Someone suggested adding "no exec", but that had no effect. This
exact
config works just fine on any 2500 in our network, but I have yet to
get
RT working with a 2600 series router running 12.0 or 12.1.
Any other ideas?
Thanks,
John
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
