What does that mean? I thought 2 serial ports should see each other because
they are local...
"EA LOUIE" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> "John Neiberger" <[EMAIL PROTECTED]> wrote:
> > If you're using that router as just a frame relay switch and nothing
> > else, there's no reason to run a routing protocol because it won't be
> > routing!
>
> well, it WILL be routing, but not IP...frame-relay using static DLCI
routes.
> Actually, is there a way to configure dynamic frame-relay routing? Like
for
> frame-relay SVC's? Inquiring minds WANT TO KNOW!
>
> ;-)
>
> (guess you didn't go golfing, eh John? neither did I...)
>
> -e-
>
> >
> > HTH,
> > John
> >
> > >>> "Thomas" <[EMAIL PROTECTED]> 3/30/01 4:31:22 PM >>>
> > Hi All - I am setting my 2501 as a frame-relay switch. Its 2 serial
> > ports
> > will be set as DCE for providing clock. Since I am trying to test the
> > compatiability of between IGRP and EIGRP, does it matter if I don't run
> > any
> > protocol (such as RIP, IGRP, EIGRP...) on this 2501? Thanks All!
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
> ____________________________________________________________________
> Get free email and a permanent address at http://www.netaddress.com/?N=1
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
