When you configure your 2 serial interfaces with DLCI information, you will
need to issue frame relay route statements from one interface to the other
interface, in this manner:
frame-relay switching
!
interface Serial1
no ip address
encapsulation frame-relay
keepalive 15
frame-relay lmi-type ansi
frame-relay intf-type dce
frame-relay route 100 interface Serial2 200
clockrate 2000000
!
interface Serial2
encapsulation frame-relay
keepalive 15
frame-relay intf-type dce
frame-relay route 200 interface Serial1 100
clockrate 64000
At 08:52 PM 3/30/01 -0500, Thomas wrote:
>What does that mean? I thought 2 serial ports should see each other because
>they are local...
>
>
>
>"EA LOUIE" <[EMAIL PROTECTED]> wrote in message
>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > "John Neiberger" <[EMAIL PROTECTED]> wrote:
> > > If you're using that router as just a frame relay switch and nothing
> > > else, there's no reason to run a routing protocol because it won't be
> > > routing!
> >
> > well, it WILL be routing, but not IP...frame-relay using static DLCI
>routes.
> > Actually, is there a way to configure dynamic frame-relay routing? Like
>for
> > frame-relay SVC's? Inquiring minds WANT TO KNOW!
> >
> > ;-)
> >
> > (guess you didn't go golfing, eh John? neither did I...)
> >
> > -e-
> >
> > >
> > > HTH,
> > > John
> > >
> > > >>> "Thomas" <[EMAIL PROTECTED]> 3/30/01 4:31:22 PM >>>
> > > Hi All - I am setting my 2501 as a frame-relay switch. Its 2 serial
> > > ports
> > > will be set as DCE for providing clock. Since I am trying to test the
> > > compatiability of between IGRP and EIGRP, does it matter if I don't run
> > > any
> > > protocol (such as RIP, IGRP, EIGRP...) on this 2501? Thanks All!
> > >
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> > >
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
> > ____________________________________________________________________
> > Get free email and a permanent address at http://www.netaddress.com/?N=1
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
