Thanks All!
"EA Louie" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> When you configure your 2 serial interfaces with DLCI information, you
will
> need to issue frame relay route statements from one interface to the other
> interface, in this manner:
>
> frame-relay switching
> !
> interface Serial1
> no ip address
> encapsulation frame-relay
> keepalive 15
> frame-relay lmi-type ansi
> frame-relay intf-type dce
> frame-relay route 100 interface Serial2 200
> clockrate 2000000
> !
> interface Serial2
> encapsulation frame-relay
> keepalive 15
> frame-relay intf-type dce
> frame-relay route 200 interface Serial1 100
> clockrate 64000
>
>
> At 08:52 PM 3/30/01 -0500, Thomas wrote:
> >What does that mean? I thought 2 serial ports should see each other
because
> >they are local...
> >
> >
> >
> >"EA LOUIE" <[EMAIL PROTECTED]> wrote in message
> >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > "John Neiberger" <[EMAIL PROTECTED]> wrote:
> > > > If you're using that router as just a frame relay switch and nothing
> > > > else, there's no reason to run a routing protocol because it won't
be
> > > > routing!
> > >
> > > well, it WILL be routing, but not IP...frame-relay using static DLCI
> >routes.
> > > Actually, is there a way to configure dynamic frame-relay routing?
Like
> >for
> > > frame-relay SVC's? Inquiring minds WANT TO KNOW!
> > >
> > > ;-)
> > >
> > > (guess you didn't go golfing, eh John? neither did I...)
> > >
> > > -e-
> > >
> > > >
> > > > HTH,
> > > > John
> > > >
> > > > >>> "Thomas" <[EMAIL PROTECTED]> 3/30/01 4:31:22 PM >>>
> > > > Hi All - I am setting my 2501 as a frame-relay switch. Its 2 serial
> > > > ports
> > > > will be set as DCE for providing clock. Since I am trying to test
the
> > > > compatiability of between IGRP and EIGRP, does it matter if I don't
run
> > > > any
> > > > protocol (such as RIP, IGRP, EIGRP...) on this 2501? Thanks All!
> > > >
> > > >
> > > > _________________________________
> > > > FAQ, list archives, and subscription info:
> > > > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > > >
> > > >
> > > >
> > > > _________________________________
> > > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > >
> > >
> > > ____________________________________________________________________
> > > Get free email and a permanent address at
http://www.netaddress.com/?N=1
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> >
> >_________________________________
> >FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
