Actually, that does not do it either. As I said, this is really playing
with my brain. I even flashed newer code on the 2511 thinking that it might
be a bug in the previous code.
Anyone got another idea ?
thanks again.
----- Original Message -----
From: "Sean Young" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, April 04, 2001 6:19 PM
Subject: Re: 2611 and reverse telnet
> You should have the following on your 2611 async line:
>
> line 1 16
> no exec
> terminal-type vt100
> transport input all
> stopbits 1
> flowcontrol hardware
>
> that should do the trick.
>
> >From: "perryb" <[EMAIL PROTECTED]>
> >Reply-To: "perryb" <[EMAIL PROTECTED]>
> >To: <[EMAIL PROTECTED]>
> >Subject: 2611 and reverse telnet
> >Date: Wed, 4 Apr 2001 16:49:01 -0700
> >
> >Ok, this is embarassing but here goes...
> >
> >I know this has been hashed on this list, I've looked at the CCO
examples,
> >and I've scoured the archives. Everything seems to be in order, but the
> >little bugger is still baffeling.
> >
> >I'm trying to connect my 2611 to other routers for reverse telnet to
their
> >consoles. Here is the pertinent 2611 config:
> >
> >interface loopback 1.1.1.10 255.255.255.255
> >
> >line 1 16
> >no exec
> >transport input all
> >
> >Now, when I try the reverse telent out to one of my router's console by
the
> >following:
> >
> >tel 1.1.1.10 2006 /debug
> >
> >Trying 1.1.1.10, 2006 ... Open
> >[TN: received WILL ECHO (1)]
> >[TN: sent DO ECHO (1)]
> >[TN: received WILL SUPPRESS-GA (3)]
> >[TN: sent DO SUPPRESS-GA (3)]
> >[TN: received DO TTY-TYPE (24)]
> >[TN: sent WILL TTY-TYPE (24)]
> >[TN: received DO WINDOW-SIZE (31)]
> >[TN: sent WILL WINDOW-SIZE (31)]
> >[TN: Sent SB NAWS 100 36]
> >[TN: recv SB 24 1 ]
> >[TN: Sent SB 24 0 vt100]
> >
> >And it stays stuck right there and no further interaction allowed until I
> >ctrl-shift-6-x, clear the line, and disconnect the session.
> >
> >A look at the router connected to line 6 indicates that this reverse
telent
> >never made it to the router. The router's line console config is the
> >default i.e. :
> >
> >line console 0
> >
> >I need a little help on this one, I've tried many combinations and end
with
> >the same result.
> >
> >thanks
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
