Are you absolutely sure that 2006 is the correct port?
> -----Original Message-----
> From: perryb [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, April 04, 2001 8:42 PM
> To: Sean Young
> Cc: [EMAIL PROTECTED]
> Subject: Re: 2611 and reverse telnet
>
>
> Actually, that does not do it either. As I said, this is
> really playing
> with my brain. I even flashed newer code on the 2511
> thinking that it might
> be a bug in the previous code.
>
> Anyone got another idea ?
>
> thanks again.
>
>
> ----- Original Message -----
> From: "Sean Young" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Cc: <[EMAIL PROTECTED]>
> Sent: Wednesday, April 04, 2001 6:19 PM
> Subject: Re: 2611 and reverse telnet
>
>
> > You should have the following on your 2611 async line:
> >
> > line 1 16
> > no exec
> > terminal-type vt100
> > transport input all
> > stopbits 1
> > flowcontrol hardware
> >
> > that should do the trick.
> >
> > >From: "perryb" <[EMAIL PROTECTED]>
> > >Reply-To: "perryb" <[EMAIL PROTECTED]>
> > >To: <[EMAIL PROTECTED]>
> > >Subject: 2611 and reverse telnet
> > >Date: Wed, 4 Apr 2001 16:49:01 -0700
> > >
> > >Ok, this is embarassing but here goes...
> > >
> > >I know this has been hashed on this list, I've looked at the CCO
> examples,
> > >and I've scoured the archives. Everything seems to be in
> order, but the
> > >little bugger is still baffeling.
> > >
> > >I'm trying to connect my 2611 to other routers for reverse
> telnet to
> their
> > >consoles. Here is the pertinent 2611 config:
> > >
> > >interface loopback 1.1.1.10 255.255.255.255
> > >
> > >line 1 16
> > >no exec
> > >transport input all
> > >
> > >Now, when I try the reverse telent out to one of my
> router's console by
> the
> > >following:
> > >
> > >tel 1.1.1.10 2006 /debug
> > >
> > >Trying 1.1.1.10, 2006 ... Open
> > >[TN: received WILL ECHO (1)]
> > >[TN: sent DO ECHO (1)]
> > >[TN: received WILL SUPPRESS-GA (3)]
> > >[TN: sent DO SUPPRESS-GA (3)]
> > >[TN: received DO TTY-TYPE (24)]
> > >[TN: sent WILL TTY-TYPE (24)]
> > >[TN: received DO WINDOW-SIZE (31)]
> > >[TN: sent WILL WINDOW-SIZE (31)]
> > >[TN: Sent SB NAWS 100 36]
> > >[TN: recv SB 24 1 ]
> > >[TN: Sent SB 24 0 vt100]
> > >
> > >And it stays stuck right there and no further interaction
> allowed until I
> > >ctrl-shift-6-x, clear the line, and disconnect the session.
> > >
> > >A look at the router connected to line 6 indicates that
> this reverse
> telent
> > >never made it to the router. The router's line console
> config is the
> > >default i.e. :
> > >
> > >line console 0
> > >
> > >I need a little help on this one, I've tried many
> combinations and end
> with
> > >the same result.
> > >
> > >thanks
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
