If you check the cisco site you will find that the 1E2W does nto work in a
2600 series.
The only ethernet modules you can put in a 2600 series is a NM-1E or a
NM-4E.
The 1e2w will work in 3600 series though.
Regards,
Jason Baker
----- Original Message -----
From:
To:
Sent: Monday, May 07, 2001 1:17 PM
Subject: 2610 w/ an additional 1e 2w module [7:3402]
> Hi all !!
>
> I have just finished installinga new 1 e 2 w module in my 2610 router &
> It's not being recognized, unit allready had an existing Wic 2t plus the
> built in ethernet
> port. I added the 2t 1e which is actually 2 wic 1 t cards with an
> ethernet port on the main module
> and it's not being recognized, When i remove the existin wic 2 t cards
> only the main ethernet shows up on the show
> version..I do see the Act led on the module solid green but nothing on
> the sho ver..
>
> Am i mssing something ... do I have to activate this new module somehow
> ??
>
> Clueless @ this point...
>
> TIA for any info you might provide.
>
> Randy
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3407&t=3402
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
