If you want to use your 2600 as frame relay switch do as i have done buy a
NM-4a/s, 4t, 8a/s or 8/t.
A 1fe2w only works in 3600.
Regards,
Jason Baker
----- Original Message -----
From:
To:
Cc:
Sent: Tuesday, May 08, 2001 4:44 AM
Subject: Re: 2610 w/ an additional 1e 2w module [7:3402]
> o.k. so basically to get this puppy to work in the 2600 series i need to
> get
> a 1FE2W encasing module to hold the wic 2t's ?? I'm going to try to use
> this box as a
> frame switch so i'm trying to get as many serial interfaces on it as
> possible...
>
> Thanks for your help guy's!!
>
> Randy
>
>
> On Mon, 7 May 2001 13:53:25 +1000 "Jason Baker"
> writes:
> > also another tip. The WIC 2-T modules do not work in plain ethernet
> > based
> > modules (such as 1e2w).
> > You need to get a 1FE2W at least to put the WIC 2t-s in.
> >
> > However the wic 2-t's will work in the fixed serial slots in the
> > 2600's.
> >
> > Regards,
> >
> > Jason Baker
> > -------------------------------
> > Network Engineer
> >
> > ----- Original Message -----
> > From:
> > To:
> > Sent: Monday, May 07, 2001 1:17 PM
> > Subject: 2610 w/ an additional 1e 2w module [7:3402]
> >
> >
> > > Hi all !!
> > >
> > > I have just finished installinga new 1 e 2 w module in my 2610
> > router &
> > > It's not being recognized, unit allready had an existing Wic 2t
> > plus the
> > > built in ethernet
> > > port. I added the 2t 1e which is actually 2 wic 1 t cards with an
> > > ethernet port on the main module
> > > and it's not being recognized, When i remove the existin wic 2 t
> > cards
> > > only the main ethernet shows up on the show
> > > version..I do see the Act led on the module solid green but
> > nothing on
> > > the sho ver..
> > >
> > > Am i mssing something ... do I have to activate this new module
> > somehow
> > > ??
> > >
> > > Clueless @ this point...
> > >
> > > TIA for any info you might provide.
> > >
> > > Randy
> > > ________________________________________________________________
> > > GET INTERNET ACCESS FROM JUNO!
> > > Juno offers FREE or PREMIUM Internet access for less!
> > > Join Juno today! For your FREE software, visit:
> > > http://dl.www.juno.com/get/tagj.
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to
> > [EMAIL PROTECTED]
> > >
> >
> >
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3728&t=3402
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
