o.k. so basically to get this puppy to work in the 2600 series i need to
get
a 1FE2W encasing module to hold the wic 2t's ?? I'm going to try to use
this box as a
frame switch so i'm trying to get as many serial interfaces on it as
possible...
Thanks for your help guy's!!
Randy
On Mon, 7 May 2001 13:53:25 +1000 "Jason Baker"
writes:
> also another tip. The WIC 2-T modules do not work in plain ethernet
> based
> modules (such as 1e2w).
> You need to get a 1FE2W at least to put the WIC 2t-s in.
>
> However the wic 2-t's will work in the fixed serial slots in the
> 2600's.
>
> Regards,
>
> Jason Baker
> -------------------------------
> Network Engineer
>
> ----- Original Message -----
> From:
> To:
> Sent: Monday, May 07, 2001 1:17 PM
> Subject: 2610 w/ an additional 1e 2w module [7:3402]
>
>
> > Hi all !!
> >
> > I have just finished installinga new 1 e 2 w module in my 2610
> router &
> > It's not being recognized, unit allready had an existing Wic 2t
> plus the
> > built in ethernet
> > port. I added the 2t 1e which is actually 2 wic 1 t cards with an
> > ethernet port on the main module
> > and it's not being recognized, When i remove the existin wic 2 t
> cards
> > only the main ethernet shows up on the show
> > version..I do see the Act led on the module solid green but
> nothing on
> > the sho ver..
> >
> > Am i mssing something ... do I have to activate this new module
> somehow
> > ??
> >
> > Clueless @ this point...
> >
> > TIA for any info you might provide.
> >
> > Randy
> > ________________________________________________________________
> > GET INTERNET ACCESS FROM JUNO!
> > Juno offers FREE or PREMIUM Internet access for less!
> > Join Juno today! For your FREE software, visit:
> > http://dl.www.juno.com/get/tagj.
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> >
>
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3679&t=3402
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
