You say the ports are locked to 100/ Full on the 2924 ??? It sounds as if
you have done the trouble shooting with the cables. Have you isolated which
box this is coming from & then maybe moved to swap the NIC ??? How are you
reading the CRC errors ???
A few ideas
Phil
----- Original Message -----
From: Keith Woodworth
To:
Sent: Wednesday, May 16, 2001 12:06 AM
Subject: Errors on link. [7:4646]
> Have 4 servers plugged into a 2924XL switch. Pegged the links to 100/full
> and of all the links our mail server always shows errors:
>
> 343 input errors, 169 CRC, 174 frame
>
> None of the other server links on the switch show any errors of any kind.
> Ive swapped cable and ports on the switch and still get errors.
>
> This is traffic on the line, fairly low:
>
> 5 minute input rate 114000 bits/sec, 38 packets/sec
> 5 minute output rate 111000 bits/sec, 36 packets/sec
>
> Next would be to look at the server and swap ethernet ports (it has 2)
> maybe Ive got a bad ethernet intface on the server?
>
> I think as this is CRC errors its physical layer and/or layer 2 issues
> that I'm seeing here.
>
> Anywhere else to look?
>
> Keith
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4652&t=4646
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
