I doing it with a pair of wic-1dsu-t1. Using a T1 crossover cable that i
got from pacificcable.com
Neil Schneider
""Tony Mesias"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Anyone know off the top of thier head if it's possible to configure F-t1
> interfaces back to back? I have a "cross-over" cable where I hook up the
TX
> from one end to the RX of the other and vice verse, but this is unlike
High
> speed serial interfaces where you set a clock rate on one side, drop a
> couple addresses, throw up HDLC encapsulation and you are off and running.
>
> Any ideas?
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5146&t=5139
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
