I am doing this right now with our frame provider. We will be using 2 for
now but up to 8 t1s. We have to use the inverse mux on each side of the line
(ours and the providers). With 2 T1s we just get a 3 meg frame port and off
we go. We are using Quick Eagle DL3800 8 port inverse muxs.
Tim
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Kelly D Griffin
Sent: Tuesday, May 22, 2001 8:28 AM
To: [EMAIL PROTECTED]
Subject: Re: How to Multiplex 3 T1s [7:4625]
Has anyone done this successfully and shown an increase in bandwidth? Has
anyone done this with PVCs on the same router and frame port?
Kelly D Griffin, CCNA, CCDA
Network Engineer
Kg2 Network Design
877.418.4025
http://www.kg2.com
----- Original Message -----
From: "Wojtek Zlobicki"
To:
Sent: Monday, May 21, 2001 8:54 PM
Subject: Re: How to Multiplex 3 T1s [7:4625]
> What is to be gained by using an inverse mux ? How much extra overhead is
> caused by this rather than running in inversed mode?
>
>
> ""Jon Wagner"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Take a look at this config and see if it work for you:
> > http://www.cisco.com/warp/public/131/7.html
> >
> >
> > -----Original Message-----
> > From: Al Smith [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, May 15, 2001 8:57 PM
> > To: [EMAIL PROTECTED]
> > Subject: How to Multiplex 3 T1s [7:4625]
> >
> >
> > Colleagues,
> >
> > I am currently trying to multiplex / bind 3 parallel T1 clear channel
> > circuits.
> > The circuits will be terminating on a 7206 router on an 8 port multi
> > channel T1 card.
> >
> > My question is how do I bind the 3 T1s together to get the total
aggregate
> > bandwidth of 3 T1s.
> > I have only found info on Inverse multiplexing for ATM which is not what
I
> > am trying to achieve.
> > what I have is strictly 3 Point to Point T1 circuits using PPP.
> >
> > Albert Smith
> > Lucent Technologies
> > System Engineer, CCNP MCSE
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ____________________________________________
> http://1cis.com
> Free E-mail Servers with unlimited mailboxes
> 1st Class Internet Solutions
____________________________________________
http://1cis.com
Free E-mail Servers with unlimited mailboxes
1st Class Internet Solutions
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5446&t=4625
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
