Hi
i am getting this message when i run
show int command on 3600 series router with x25 on it
i tried configuring it but i removed whats wrong can u pls help....
Regards
Arun Sharma
Serial1/3.1 is deleted, line protocol is down
Hardware is M4T
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation X25
Serial2/0 is down, line protocol is down
Hardware is M4T
Description: BGW 1.1
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation X25, loopback not set
X.25 DCE, address , state R/Inactive, modulo 8, timer 0
Defaults: idle VC timeout 0
cisco encapsulation
input/output window sizes 2/2, packet sizes 128/128
Timers: T10 60
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6090&t=6090
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
