Hi
let me explain what i mean to ask
i try to configured a serial interface(sub interface) on ser1/3 i could n't
achieve what i was trying to do (i was trying to configure a backup
interface) so i removed the sub interface using
command
no int ser1/3.1
but now even after removing the interface i see the following thing when i
use show int ..
i think it should not be there ...right or i am wrong
so why it still show this
Serial1/3.1 is deleted, line protocol is down
Hardware is M4T
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation X25
Serial2/0 is down, line protocol is down
Hardware is M4T
Description: BGW 1.1
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation X25, loopback not set
X.25 DCE, address , state R/Inactive, modulo 8, timer 0
Regards
Arun Sharma
""ElephantChild"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> On Mon, 28 May 2001, Arun wrote:
>
> > Hi
> > i am getting this message when i run
> > show int command on 3600 series router with x25 on it
> > i tried configuring it but i removed whats wrong can u pls help....
>
> If you didn't do so already, read what the cisco docs say on "show
> interface", then tell us what specific part you still don't understand,
> and what you think it could mean. Also tell us what other steps you took
> to answer your question, and how and why you think they failed.
>
> Or, if your question isn't "what does a deleted/down status mean?",
> you'll have to tell us what it is.
>
> > Regards
> > Arun Sharma
> >
> > Serial1/3.1 is deleted, line protocol is down
> > Hardware is M4T
> > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > reliability 255/255, txload 1/255, rxload 1/255
> > Encapsulation X25
> > Serial2/0 is down, line protocol is down
> > Hardware is M4T
> > Description: BGW 1.1
> > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > reliability 255/255, txload 1/255, rxload 1/255
> > Encapsulation X25, loopback not set
> > X.25 DCE, address , state R/Inactive, modulo 8, timer 0
> > Defaults: idle VC timeout 0
> > cisco encapsulation
> > input/output window sizes 2/2, packet sizes 128/128
> > Timers: T10 60
>
> --
> "Someone approached me and asked me to teach a javascript course. I was
> about to decline, saying that my complete ignorance of the subject made
> me unsuitable, then I thought again, that maybe it doesn't, as driving
> people away from it is a desirable outcome." --Me
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6097&t=6090
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
