Deleting subinterfaces often requires a 'reload' for them to disappear.
Greetings
Reinhold
On Mon, 28 May 2001, Arun wrote:
> Hi
> let me explain what i mean to ask
> i try to configured a serial interface(sub interface) on ser1/3 i could n't
> achieve what i was trying to do (i was trying to configure a backup
> interface) so i removed the sub interface using
> command
> no int ser1/3.1
> but now even after removing the interface i see the following thing when i
> use show int ..
> i think it should not be there ...right or i am wrong
> so why it still show this
> Serial1/3.1 is deleted, line protocol is down
> Hardware is M4T
> MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> reliability 255/255, txload 1/255, rxload 1/255
> Encapsulation X25
> Serial2/0 is down, line protocol is down
> Hardware is M4T
> Description: BGW 1.1
> MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> reliability 255/255, txload 1/255, rxload 1/255
> Encapsulation X25, loopback not set
> X.25 DCE, address , state R/Inactive, modulo 8, timer 0
>
>
> Regards
> Arun Sharma
>
>
> ""ElephantChild"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > On Mon, 28 May 2001, Arun wrote:
> >
> > > Hi
> > > i am getting this message when i run
> > > show int command on 3600 series router with x25 on it
> > > i tried configuring it but i removed whats wrong can u pls help....
> >
> > If you didn't do so already, read what the cisco docs say on "show
> > interface", then tell us what specific part you still don't understand,
> > and what you think it could mean. Also tell us what other steps you took
> > to answer your question, and how and why you think they failed.
> >
> > Or, if your question isn't "what does a deleted/down status mean?",
> > you'll have to tell us what it is.
> >
> > > Regards
> > > Arun Sharma
> > >
> > > Serial1/3.1 is deleted, line protocol is down
> > > Hardware is M4T
> > > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > > reliability 255/255, txload 1/255, rxload 1/255
> > > Encapsulation X25
> > > Serial2/0 is down, line protocol is down
> > > Hardware is M4T
> > > Description: BGW 1.1
> > > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > > reliability 255/255, txload 1/255, rxload 1/255
> > > Encapsulation X25, loopback not set
> > > X.25 DCE, address , state R/Inactive, modulo 8, timer 0
> > > Defaults: idle VC timeout 0
> > > cisco encapsulation
> > > input/output window sizes 2/2, packet sizes 128/128
> > > Timers: T10 60
> >
> > --
> > "Someone approached me and asked me to teach a javascript course. I was
> > about to decline, saying that my complete ignorance of the subject made
> > me unsuitable, then I thought again, that maybe it doesn't, as driving
> > people away from it is a desirable outcome." --Me
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6142&t=6090
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
