I have:
2 off Juniper M20s - STM-16/STM-4/E-3/GE/FE
1 off Foundry BigIron - GE/100/10
1 off Foundry NetIron - GE/100/10
2 off Cat6509s + MSFC - GE/100/10
1 off 7206VXR - GE/100/E-1
1 off 3640 - FE/E-3/E-1
oh, and a 2511-RJ
will this do for CCNA? do I need a BRI simulator?
thanks
Andy
PS - just kidding, this is my work lab
----- Original Message -----
From: "Donald Duck"
To:
Sent: Tuesday, June 05, 2001 3:18 AM
Subject: Re: Comments on my Home Lab! [7:7108]
> With a 4000 ? LOL....
> You really are a Donald Duck !! You might as well ask him to find a GE
> module ... haha... I'm trying to imagine how it would go if he had gone
out
> and buy a FE module and find out that he need to buy a 4500/4700 to be
able
> to use it...
>
> Donald B Johnson Sr
>
>
> ""Donald B Johnson jr"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > You could probably get a module for the 4xxx to do FE cheaper.
> > Thank You,
> >
> > Don Johnson
> > Engineering/Technical Operations
> > Adelphia Communications Corp.
> > P# 814-260-3259 office
> > P# 814-274-9391 lab
> > F# 814-260-3227
> > [EMAIL PROTECTED]
> >
> >
> >
> > ----- Original Message -----
> > From: "Daniel Cotts"
> > To:
> > Sent: Monday, June 04, 2001 11:51 AM
> > Subject: RE: Comments on my Home Lab! [7:7108]
> >
> >
> > > Think about another two serial interfaces on the 4000M.
> > > A router that can be used as a terminal server is good. 2509/2511 are
> most
> > > common.
> > > I don't see any ISDN BRI interfaces. You'll want some. 2503
> > > Depending on budget you might want to stay with the 2500 series or
> spring
> > > for the newer 2600s. To do trunking on the Cat5K you'll need a router
> with
> > a
> > > 100 Mbs port. 2620/2621 would do it.
> > > To run the newer Enterprise code on the 2500s you will need 16 Flash
or
> > use
> > > MZMaker. (Check archives for details.)
> > >
> > > > -----Original Message-----
> > > > From: JC [mailto:[EMAIL PROTECTED]]
> > > > Sent: Monday, June 04, 2001 12:41 PM
> > > > To: [EMAIL PROTECTED]
> > > > Subject: Comments on my Home Lab! [7:7108]
> > > >
> > > >
> > > > Hello,
> > > >
> > > > I just bought a home lab today. The equipment in my lab
> > > > will be as
> > > > follows. Does anyone have any input as to the quality of
> > > > this lab setup?
> > > > What would you expand on in the future. Has anyone taken the
> > > > CCIE lab that
> > > > can tell me what they think of this lab and possible
> > > > scenarios I should run
> > > > through with this lab. I will be receiving the items over
> > > > the next few
> > > > days. The lab is as follows:
> > > >
> > > > Cisco 2507 8/16 11.2
> > > >
> > > > Cisco 2501 8/16 11.2
> > > >
> > > > Cisco 4000 M+ 1 token ring,2 serial
> > > >
> > > > Cisco 2924XL-EL
> > > >
> > > > Cisco 5005 catalyst
> > > >
> > > > 1 12 port 100 BaseT,1 sup engine
> > > >
> > > > back to back Cables
> > > >
> > > > 3 Console kits
> > > >
> > > >
> > > >
> > > > Thank you,
> > > >
> > > > JC
> > > > Report misconduct
> > > > and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7227&t=7108
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
