Rick,
This is a very valueable command. If you specify the interface like this
you narrow down what you'll receive:
show controllers serial 0
I will say if the cable is physically attached and if it is DTE or DCE.
>>>Brian
>From: "Watson, Rick, CTR, OUSDC"
>Reply-To: "Watson, Rick, CTR, OUSDC"
>To: [EMAIL PROTECTED]
>Subject: 'show controllers' command [7:8528]
>Date: Thu, 14 Jun 2001 11:09:58 -0400
>
>...reading the Cisco Press Support Book. They talked about the 'show
>controllers' command. My question is when and why would you use this
>command? I read that the output can be overwhelming, and that some of the
>information is irrelevant! Go figure!. But again, when would you need the
>information form this command? Thanks for the insight.
>
>Rick Watson
>Network Engineer
>Advanced Systems Development, Inc.
>OUSD(Comptroller)
>703.697.5710 office
>[EMAIL PROTECTED]
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8753&t=8528
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
