I am having a lot of trouble interpreting your problem. However, one
thing I noticed is that you say you have a fast ethernet interface on a
2610 router. According to the quick reference guide, there is no fast
ethernet module available for the 2610. Unless they've come out with
something new, this may be your problem. I'm guessing that you have
your switch set for 100Mbps/full duplex and your router can only do
10Mbps.
In addition, not only can you not do 100Mbps/full duplex on a 2610,
that ethernet interface cannot be a trunk port. Those do not support
ISL or 802.1q unless something has changed recently.
If I'm wrong, someone please correct me.
Regards,
John
>>> "Kiran Kumar M" 7/24/01 8:27:12 AM >>>
Hai,
I am facing a strange problem. I am using a cisco 2610 router in my
network. In that I am having one fastethernet, and 2 WIC2T . When I am
connecting to the L3 switch, it is able to ping to that particular
VLAN,
and unable to ping to other VLANS or outside of that VLAN. If I use
another router with ethernet card (becuase I am not having another
ethernet card in first router), with the same setup it is able to
communicate with the outside world. So I concluded that it is not the
problem with L3 switch. I tried to find it on cisco site, but unable
to
locate the solution.
Thanks in advance,
Kiran
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13509&t=13497
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
