The 2610 doesn't have a fast ethernet port; it's a 10mb ethernet port
only. Can we see the config from the 2610?
tm
Tim Medley - CCNP+Voice
Network Architect
VoIP Group
iReadyWorld
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Kiran Kumar M
Sent: Tuesday, July 24, 2001 10:27 AM
To: [EMAIL PROTECTED]
Subject: Problem with Fastethernet 2610 router [7:13497]
Hai,
I am facing a strange problem. I am using a cisco 2610 router in my
network. In that I am having one fastethernet, and 2 WIC2T . When I am
connecting to the L3 switch, it is able to ping to that particular VLAN,
and unable to ping to other VLANS or outside of that VLAN. If I use
another router with ethernet card (becuase I am not having another
ethernet card in first router), with the same setup it is able to
communicate with the outside world. So I concluded that it is not the
problem with L3 switch. I tried to find it on cisco site, but unable to
locate the solution.
Thanks in advance,
Kiran
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13548&t=13497
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
