hi mike,
if you posted some configs i could plug it into lab and check it out.
Jason
> -----Original Message-----
> From: Mike [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, 1 August 2001 12:03 pm
> To: [EMAIL PROTECTED]
> Subject: GRE and routing protocols [7:14432]
>
> I've configured a point-to-point GRE tunnel between two routers. Works
> fine
> with static routes, however, once I turn on RIP I get the following in
> about
> 30 seconds.
>
> %TUN-5-RECURDOWN: Tunnel0 temporarily disabled due to recursive routing
> 1d01h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed
> state to
> down
>
> I've read about the recursive routing problem with IP in IP, can someone
> explain exactly why this is happening? Also, what is the solution.
>
> thanks,
> Mike
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14435&t=14432
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]