fyi
see
http://www.cisco.com/univercd/cc/td/doc/product/software/ios102/em/48049.htm
#xtocid200671
(watch the wrap)
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Baker, Jason
Sent: Tuesday, July 31, 2001 10:35 PM
To: [EMAIL PROTECTED]
Subject: RE: GRE and routing protocols [7:14432]
hi mike,
if you posted some configs i could plug it into lab and check it out.
Jason
> -----Original Message-----
> From: Mike [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, 1 August 2001 12:03 pm
> To: [EMAIL PROTECTED]
> Subject: GRE and routing protocols [7:14432]
>
> I've configured a point-to-point GRE tunnel between two routers. Works
> fine
> with static routes, however, once I turn on RIP I get the following in
> about
> 30 seconds.
>
> %TUN-5-RECURDOWN: Tunnel0 temporarily disabled due to recursive routing
> 1d01h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed
> state to
> down
>
> I've read about the recursive routing problem with IP in IP, can someone
> explain exactly why this is happening? Also, what is the solution.
>
> thanks,
> Mike
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14437&t=14432
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
