ummm...did you try a 'no shut' on ser0/0?
----- Original Message -----
From: "Ole Drews Jensen"
To:
Sent: Wednesday, September 05, 2001 11:16 AM
Subject: Frame Relay - Behind The Scenes... [7:18653]
> I am getting a Frame Relay setup and I just got the local loop installed
and
> tested today by the local telco.
>
> I know that the Frame Relay provider hasn't started their configuration
yet,
> but shouldn't I be able to see just one little change on my router when I
> connect the CSU/DSU to the local loop box?
>
> I have done a:
>
> show interface serial 0/0
> show interface serial 0/0.101
> show frame-relay lmi
> show controllers serial 0/0
>
> and everything is exactly the same before and after connecting the cable.
>
> Thanks for any comments on this.
>
> Ole
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Ole Drews Jensen
> Systems Network Manager
> CCNA, MCSE, MCP+I
> RWR Enterprises, Inc.
> [EMAIL PROTECTED]
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> http://www.RouterChief.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> NEED A JOB ???
> http://www.oledrews.com/job
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18758&t=18653
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]