Without an IP from your ISP, all u can do is #sh cdp , nothing much, not
even pinging 'outside', you4ll probably see the dlci if your ISP has already
set it up (#sh fra pvc), though i had to wait for an IP to anything else.
----- Original Message -----
From: EA Louie
To:
Sent: Thursday, September 06, 2001 7:05 AM
Subject: Re: Frame Relay - Behind The Scenes... [7:18653]
> ummm...did you try a 'no shut' on ser0/0?
>
> ----- Original Message -----
> From: "Ole Drews Jensen"
> To:
> Sent: Wednesday, September 05, 2001 11:16 AM
> Subject: Frame Relay - Behind The Scenes... [7:18653]
>
>
> > I am getting a Frame Relay setup and I just got the local loop installed
> and
> > tested today by the local telco.
> >
> > I know that the Frame Relay provider hasn't started their configuration
> yet,
> > but shouldn't I be able to see just one little change on my router when
I
> > connect the CSU/DSU to the local loop box?
> >
> > I have done a:
> >
> > show interface serial 0/0
> > show interface serial 0/0.101
> > show frame-relay lmi
> > show controllers serial 0/0
> >
> > and everything is exactly the same before and after connecting the
cable.
> >
> > Thanks for any comments on this.
> >
> > Ole
> >
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > Ole Drews Jensen
> > Systems Network Manager
> > CCNA, MCSE, MCP+I
> > RWR Enterprises, Inc.
> > [EMAIL PROTECTED]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > http://www.RouterChief.com
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > NEED A JOB ???
> > http://www.oledrews.com/job
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18771&t=18653
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
