Nice try, but no, keepalive is not disabled. By the
way, sometimes, interface will go "down"...


--- Ole Drews Jensen  wrote:
> I don't know if this is the problem, but if you have
> keepalives disabled
> with the 'no keepalive' command, the link will stay
> up even though the PVC
> goes down.
> 
> A 'show conf' from both routers would help.
> 
> Hth,
> 
> Ole
> 
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  Ole Drews Jensen
>  Systems Network Manager
>  CCNA, MCSE, MCP+I
>  RWR Enterprises, Inc.
>  [EMAIL PROTECTED]
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
>  http://www.RouterChief.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  NEED A JOB ???
>  http://www.oledrews.com/job
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> 
> -----Original Message-----
> From: Jim Bond [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, September 20, 2001 4:56 PM
> To: [EMAIL PROTECTED]
> Subject: frame relay question [7:20609]
> 
> 
> Hello,
> 
> We have AT&T frame line between US and Asia.
> Sometimes
> frame line is not available (therefore ISDN backup
> kicked in). But the weird thing is on both side
> frame
> routers, show serial interface says up. I couldn't
> ping between the 2 frame routers. Worse, on the
> syslog
> server, the link down was not captured 'cause the
> serial were still "up". 
> 
> What can I do to collect some fact and data so I can
> yell at AT&T?
> 
> Thanks in advance.
> 
> Jim
> 
> __________________________________________________
> Terrorist Attacks on U.S. - How can you help?
> Donate cash, emergency relief information
>
http://dailynews.yahoo.com/fc/US/Emergency_Information/
[EMAIL PROTECTED]


__________________________________________________
Terrorist Attacks on U.S. - How can you help?
Donate cash, emergency relief information
http://dailynews.yahoo.com/fc/US/Emergency_Information/




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20616&t=20609
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to