A PVC going down will not necessarily drop the whole serial interface.
Use the "show frame pvc" command to list your PVCs and their status. This
command also gives the last time the status changed.
I'm surprised you aren't getting messages about DLCI state changes - we do,
and I don't think we've done anything in particular to enable them - what
are your logging settings?
JMcL
----- Forwarded by Jenny Mcleod/NSO/CSDA on 21/09/2001 09:07 am -----
"Ole
Drews
Jensen" To:
[EMAIL PROTECTED]
Subject: RE: frame relay question
[7:20609]
Sent
by:
nobody@groups
tudy.com
21/09/2001
08:25
am
Please
respond
to
"Ole
Drews
Jensen"
I don't know if this is the problem, but if you have keepalives disabled
with the 'no keepalive' command, the link will stay up even though the PVC
goes down.
A 'show conf' from both routers would help.
Hth,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.RouterChief.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Jim Bond [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 20, 2001 4:56 PM
To: [EMAIL PROTECTED]
Subject: frame relay question [7:20609]
Hello,
We have AT&T frame line between US and Asia. Sometimes
frame line is not available (therefore ISDN backup
kicked in). But the weird thing is on both side frame
routers, show serial interface says up. I couldn't
ping between the 2 frame routers. Worse, on the syslog
server, the link down was not captured 'cause the
serial were still "up".
What can I do to collect some fact and data so I can
yell at AT&T?
Thanks in advance.
Jim
__________________________________________________
Terrorist Attacks on U.S. - How can you help?
Donate cash, emergency relief information
http://dailynews.yahoo.com/fc/US/Emergency_Information/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20624&t=20609
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
