Okie, Here is my CAT 4006 specs and topology. My 4006 has a Supervisor Engine II (WS-X4013). It has an uplink TRUNK to a CAT 6509 that has MSFC doing routing between VLANS and has MLS enabled.
My question is if I have MLS configured on MSFC of the 6509, the enabling of MLS on CATOS of 4006 via 6509 MSFC as the MLS-RP working? Thanks! Thomas N. ""MADMAN"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Sure if you use an external MLS-RP, 75xx, 72xx, 4500, 4700. I'm > reasonably sure it's a hardware issue with the WS-X4232-L3. > > Dave > > Thomas wrote: > > > > Hi All, > > > > I wonder if CAT 4006 switch support MLS? It doesn't seem to have a layer 3 > > card. I wonder if I can enable MLS using an external router, or pointing > it > > to the MSFCs of a CAT 6500 that have MLS enabled? Thanks! > > > > Thomas N. > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24154&t=24142 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
